Vivotek PZ7131, PZ7132 manual Image Settings

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Fix iris Advanced mode factor and focus range.

: Select this item to set up the iris at the maximum value; then adjust the zoom

Image Settings

Advanced mode

Click Image settings to open the Image Settings page. In this page, you can tune White balance, Brightness, Saturation, Contrast, and Sharpness for video compensation.

White balance: Adjust the value for best color temperature. ■ Auto

The Network Camera automatically adjusts the color temperature of light in response to different light sources. The white balance setting defaults to Auto and works well in most situations.

■ Keep current value

Follow the steps below to manually set the white balance to compensate for the ambient lighting conditions.

1.Set the White balance to Auto and click Save.

2.Place a sheet of white paper in front of the lens; then allow the Network Camera to adjust the color temperature automatically.

3.Select Keep current value to confirm the setting while the white balance is being measured.

4.Click Save to take effect.

Image Adjustment

■Brightness: Adjust the image brightness level, which ranges from -5 to +5. The default value is set to 0.

■Saturation: Adjust the image saturation level, which ranges from -5 to +5. The default value is set to 0.

■Contrast: Adjust the image contrast level, which ranges from -5 to +5. The default value is set to 0.

■Sharpness: Adjust the image sharpness level, which ranges from -3 to +3. The default value is set to 0.

You can click Preview to fine-tune the image, or click Restore to recall the original settings without incorporating the changes. When completed with the settings on this page, click Save to take effect and click Close to quit the page.

User's Manual - 53