VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Camera control
This section explains how to control the Network Camera’s Pan/Tilt/Zoom/Focus operation by a control panel and set preset positions.
Preset locations
In this page, you can set preset positions for the Network Camera. You can also select some preset positions for it to patrol. A total of 20 preset positions can be configured.
Please follow the steps below to set a preset position:
1.Adjust the shooting area to a desired position using the buttons on the right side of the window.
2.Click Set as home or Default home to define your home definition.
3.In the Preset position name text box, enter a descriptive name for the preset position. The preset position name allows up to forty characters. Click Add to take effect. The preset positions will show up under the Preset location list on the
4.To add more preset positions, please repeat step 1~3.
5.To remove a preset position from the list, select a preset position name from the Preset Positions
6.Click Save to take effect.
3
1functions are the same as the control panel on home page
2
3
5
6
60 - User's Manual
