Vivotek PZ7132, PZ7131 manual Sensor Settings

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Sensor Settings

Advanced mode

Click Sensor Settings to open the Sensor Settings page. In this page, you can set the maximum exposure time, exposure level, AGC, and WDR (Wide Dynamic Range) settings.

You can configure two sets of sensor settings: one for normal situation; the other for special situation, such as day/night/schedule mode.

Exposure

■Exposure level: You can manually set up the Exposure level, which ranges from 1 to 8 (dark to bright). The default value is 4.

■Max gain (Auto Gain Control): You can manually set up the AGC level (4X or 8X). The default value is 4X.

■Enable BLC (Back Light Compensation)

Enable it when the object is too dark or too bright to recognize. It allows the camera to adjust to the best light conditions in any environment and automatically give the necessary light compensation.

You can click Preview to fine-tune the image, or click Restore to recall the original settings without incorporating the changes. When completed with the settings on this page, click Save to take effect and click Close to quit the page.

54 - User's Manual