VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Patrol Settings
You can select some preset locations for the Network Camera to patrol.
Please follow the steps below to set a preset position:
1.Click a preset location on the list and then click Select.
2.The selected preset location will show up on the Source of Selected locations list.
3.Repeat step 1 and 2 to select more preset locations to patrol around.
4.If you want to delete a selected location, click it on the list and then click Remove.
5.Click the selected locations and then click Up or Down to arrange the order for patrolling.
6.Adjust the Auto pan/patrol speed. (1~5 seconds)
7.Set the Dwelling time for each preset location during auto patrol of the network camera. The default value is 10 seconds. You can also manually enter a value into the blank, and then click Update.
8.Click Save to enable the settings.
1
2
4
5
8
6
7
User's Manual - 61