Adjusting the Wired Settings
If your player is connected to your home network with an ethernet cable, the player will automatically detect the connection. You can manually adjust the settings, but VIZIO recommends this for advanced users only.
To adjust the wired settings:
1.From the Network Menu, use the Arrow buttons on the remote to highlight IP Setting and press OK.
2.Use the Arrow buttons on the remote to highlight Manual and press OK.
To change the individual IP settings, IP Mode must be set to Manual.
3.Use the Arrow and OK buttons on the remote to change each of the IP Mode settings:
•IP Address
•Subnet Mask
•Default Gateway
•DNS1
•DNS2
If you are unsure what values to enter, contact your Internet Service Provider (ISP) for assistance.
4. When you are finished, highlight Apply and press OK.
4
Setting Up a Wireless Connection Manually
If you have a wireless home network, including a wireless router or modem and an internet connection, you can set up the player to connect wirelessly.
To set up a wireless connection manually:
1.From the Network Menu, use the Arrow buttons on the remote to highlight Wireless Setting and press OK.
2.Use the Arrow buttons on the remote to highlight Scan and press OK.
A list of available wireless networks is displayed.
3.Use the Arrow buttons on the remote to highlight the name of your home wireless network, then press OK.
If your network is password- protected, you are prompted to enter a password. Enter your password using the remote.
When finished, highlight Next and press OK.
28
