VIZIO VM60P HDTV User Manual
2.6 Connecting an external Receiver/Amp
1.Turn off the power to the Plasma HDTV and Receiver/Amp.
2.Using an audio cable (white and red connectors), connect the cable to the audio input connectors on the Receiver/Amp and connect the other end to the AUDIO OUT (white area) audio connectors for Analog Audio at the rear of the Plasma HDTV.
3.Turn on the power to the Plasma HDTV and Receiver/Amp.
4.Then press the MENU button on the remote control to open the
5.Press the 
button on the remote to highlight the Audio Settings menu.
6. Press the button on the remote to select the Audio Settings menu.
7.Press the 
button on the remote to highlight Speakers and then press the OK button.
8.Press the 
button on the remote to select OFF so that the sound will now be routed through your Receiver/Amp system. Press EXIT on the remote to close the OSD.
Note:
a)Refer to your Receiver/Amp user manual to select the corresponding audio input.
b)The audio output is not amplified and cannot be connected directly to external speakers.
Optical Output of Audio received with HD Programs
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical DIGITAL AUDIO OUT (gray area) at the rear of the Plasma HDTV. This is active when receiving digital audio with the programs from the DTV/TV CABLE/ANTENNA input.
Version 3/26/2007 | 28 |
| www.VIZIO.com |
