VIZIO VM60P HDTV User Manual
3.If the or button is pressed first, then the Range Mode is activated so that you can specify a smaller range of channels to be scanned again.
Press the 
button to highlight From Channel and enter the channel using the number buttons, then press the 
button again to highlight To Channel and enter the channel using the number buttons. Press OK to start scanning.
Press EXIT to navigate away from this screen.
Note: If the OK button is pressed, then the automatic scanning will start again.
3.3.4 Adding or Deleting (Skipping) DTV Channels
To select a DTV channel to be skipped when ‘channel surfing’ with the CH + / - buttons, or to be added to these feature, follow this procedure.
4.Follow the steps in Section 3.3.2 to display the DTV Tuner Setup menu. Press the 
button to highlight Channel Skip. Press the OK button.
5.The list of channels available and stored in memory is shown on the screen. If the list is longer than 8 channels, as you repeatedly press the 
button you will be able to scroll through to see them all. The boxes to the right of the channel names are empty by default.
Version 3/26/2007 | 36 |
| www.VIZIO.com |
