Vizualogic A-1285/6 manual Enter

™

--Audio Setup Page--

Analog audio setup Equalizer

3D Processing

HDCD

GOTO Audio Setup page

Press ENTER to enter the Analog Audio setup page. The next page will be shown:

--Analog audio setup page--

Downmix STR	LT/RT
	Stereo

Set downmix mode

Set sound mix output mode:

--Press the  RIGHT arrow to enter the sub-menu. If you want analog stereo signals, set the sound mode to "STEREO"; press the  DOWN arrow once to move the selection to "STEREO", than press

ENTER.

--If you want to have Dolby Pro Logic stereo (the decoded signal will create a 2ch reality simulating effect via the R/L connectors),

select "LT/RT" then press ENTER.

--Equalizer Page--

Sound Mode	OFF	Off
Bass Boost	Off	Rock
Super Base	Off	Pop
		Live
Treble Boost	Off
		Dance
		Techno
		Classic
		Soft
Select Equalizer Type

Select the EQUALIZER menu item to setup your preferred Equalizer mode. Press ENTER to enter this selection.

You can select one of these preset Equalizer modes to adjust the audio signal to your liking.

--Equalizer Page--

Sound Mode	OFF
		On
Bass Boost	Off
Super Base	Off	Off
Treble Boost	Off

Bass Boost

--Equalizer Page--

Sound Mode	OFF
Bass Boost	Off	On
		Off
Super Base	Off
Treble Boost	Off

Super Bass

You can select one of these modes to adjust the Bass and Treble signal to your liking. ON will switch the selected mode on and OFF

will switch it back to normal Audio playback. NOTE: Please be advised that sometimes the BASS on an Audio CD or DVD is already very low, using the Bass Boost or Super Bass can overload your speakers resulting in poor sound quality.

--Equalizer Page--

Sound Mode	OFF
Bass Boost	Off	On
Super Base	Off	Off
Treble Boost	Off

Treble Boost

14