Bluetooth
Add a cell phone
Before you begin, make sure that you have cellular coverage and your Bluetooth enabled cell phone is not connected to any other Bluetooth devices. Refer to your cell phone user's manual to learn how to search for or add new Bluetooth devices.
You can pair and connect up to two cell phones to the telephone base. All paired cell phones are shown on the cell device list. Only one Bluetooth cell phone can be on a call at a time.
Once you have paired and connected a device with the telephone base, you do not need to repeat the procedure again unless you have replaced the paired cell phone with a new one.
To pair and connect a cell phone:
1.Press 
1 / 
2 on the telephone base. You hear two beeps and the 
1/ 
2 device light blinks.
• When slot 1 is empty, the base screen displays
Pairing D1... and the 
1 device light blinks.
• When slot 1 is paired and slot 2 is empty, the base screen displays Pairing D2... and the 
2 device light blinks.
• When both slots are paired, the base screen displays Replace 1 or 2? Use the dialing key to choose the desired slot. Then the corresponding light (
1 or 
2) blinks.
2.Turn on the Bluetooth feature of your cell phone. Once your cell phone finds your
VTech phone (VTech DS6751), press the appropriate key on your cell phone to continue the pairing process.
•Your cell phone may prompt you to enter the PIN of the telephone base. The default PIN of the telephone base is 0000.
•All cell phones that are connected to the telephone base are disconnected temporarily until the pairing process is completed.
3.When the cell phone is successfully paired and connected to the telephone base, you hear two beeps. The corresponding status icon (
1/ 
2) displays. The corresponding device light (
1/ 
2) turns on.
HANDSET X
ECO | 1 |
|
| 2 | ANS ON |
10:01AM 01/02
If you have trouble pairing your cell phone, it may not be compatible with your DS6751. Check the Bluetooth compatibility list at www.vtechphones.com.
•The pairing process may take up to one minute. If the pairing process fails, turn off
the Bluetooth feature on your phone and on the DS6751 by pressing 
1 / 
2. Then repeat the steps above to pair and connect again. In some cases, it may take you a few attempts to complete the pairing process.
•The steps for the pairing process may vary for different cell phones. If this happens, follow the prompts on your cell phone and your DS6751 to complete the pairing process.
18
