Appendix

Replace a handset

If you want to replace a handset, or reassign the designated handset number of a registered handset, you must deregister all handsets that are registered to the telephone base. Then register each handset individually.

To make deregistration easier, read all of the instructions below before you begin.

To deregister all handsets:

1.Press and hold FIND HANDSET at the side of the telephone base for about 10 seconds until the telephone base shows Registering... then De-register?

2.Immediately press and release SELECT or FIND HANDSET. The telephone base displays Please wait.

3.All handsets display To register HS... and ...see manual alternately when the deregistration process completes. The deregistration process takes about

10 seconds to complete.

To register the handset(s) to the telephone base again, follow the registration instructions on the previous page.

You cannot deregister all handsets if any other system handset is in use.

If deregistration fails, you may need to reset the system and try again. To reset, unplug the power from the telephone base and plug it back in.

Even if the battery is depleted, you can still deregister all handsets by following the steps above. After the handset is charged for at least 10 minutes, the handset alternately shows To register HS... and ...see manual.

72

Page 76
Image 76
VTech dect 6.0 user manual Replace a handset, To deregister all handsets