VTech DS3111-4 Adding a new handset, To register a handset to your telephone base, REGISTERED. To

• If the registration

is not successful,

the display

will show NOT

REGISTERED. To

reset the handset,

remove the

handset from the

telephone base or

charger and place

it back in. Try

the registration

process again.

Installation

Adding a new handset

Your telephone can accomodate up to five cordless handsets. You can add new handsets (DS3101, purchased separately) to the DS3111-2/TM3111-2/DS3111-3/DS3111-4at any time, but each handset must be registered with the telephone base before use.

The DS3111-2/TM3111-2/DS3111-3/DS3111-4 comes with two/three/four registered handsets (named HANDSET 1, 2, 3 and 4). Additional handsets will be assigned numbers in the order they are registered (HANDSET 3, 4 and 5). You can register a maximum of five handsets.

Before using a new DS3101 handset, you must register it with the telephone base. Each handset must be registered separately.

• You cannot

register a handset

if any system

handset is in use.

To register a handset to your telephone base

When first purchased, all optional accessory handsets show NOT REGISTRED on the screen. The handset may need to be charged for at least five minutes before registering to the

telephone base. To register a handset:

1.Place the unregistered handset in the telephone base or charger. If PRESS FIND HNDST 4 SEC ON BASE does not appear on the handset screen after a few seconds,

NOT REGISTERED

PRESS FIND HNDST

4 SEC ON BASE

www.vtechphones.com