Troubleshooting

Problem

Suggestion

 

 

My cordless handset

• Make sure the power cord is securely plugged into the telephone base. Plug the unit into a

beeps and is not

different working electrical outlet not controlled by a wall switch.

performing normally.

• Move the cordless handset closer to the telephone base. It may be out of range.

 

• Reset the telephone base by unplugging the unit’s electrical power. Wait for 15 seconds and

 

plug it back in again. Allow up to one minute for the cordless handset and the telephone base

 

to synchronize.

 

• Other electronic products can cause interference to your cordless telephone. Try installing

 

your telephone as far away from these electronic devices as possible: wireless routers, radios,

 

radio towers, pager towers, cellular telephones, intercoms, room monitors, televisions, personal

 

computers, kitchen appliances and other cordless telephones.

 

 

Common cure for

• If the unit is not responding normally, try putting the cordless handset in the telephone base or

electronic equipment.

the charger. If it does not seem to respond, try the following (in the order listed):

 

• Disconnect the power to the telephone base.

 

• Disconnect the battery from the cordless handset.

 

• Wait a few minutes before connecting power to the telephone base.

 

Re-install the battery and place the cordless handset into the telephone base or charger.

 

• Wait for the cordless handset to synchronize its connection with the telephone base. Allow up

 

to one minute for this to take place.

 

 

www.vtechphones.com

47

Appendix

Page 50
Image 50
VTech DS3111-3, DS3111-2, DS3111-4, TM3111-2 important safety instructions To synchronize