Handset battery charging, Displays Put in charger | VTech LS6195

Getting started

Handset battery charging

Once you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the telephone base to charge the battery. For best performance, keep the handset in the telephone base when not in use. The battery is fully charged after 11 hours of continuous charging. See the table on page 59 for battery operating times.

If the screen is blank or displays Put in charger, you need to charge the handset without interruption for at least 30 minutes to give the handset enough charge to use the telephone for a short time. When the battery is low, the handset displays Low battery along with a flashing icon. If you are on a call in low battery mode, the handset plays short beeps to alert you.

The following table summarizes the battery charge indicators and actions to take.

		Battery indicators					Battery status	Action
The screen is blank, or							The battery has no or very	Charge without interruption
displays Put in charger and							little charge. The handset	(about 30 minutes).
		flashes.					cannot be used.

The screen displays							The battery has enough	Charge without interruption
Low battery and						flashes.	charge to be used for a	(about 30 minutes).
Low battery and						flashes.	charge to be used for a	(about 30 minutes).
							short time.

The screen displays							The battery is charged.	To keep the battery charged,
HANDSET X.								place it in the telephone
								base when not in use.

If you place the handset in the telephone base without installing a battery, the screen displays No battery.

After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time. For instructions, see Set date and time on page 13.

To skip setting the date and time, press OFF/CANCEL.

Date: MM/DD/YY

ECO

ANS ON

Image 8

VTech LS6195-17, LS6195-15, LS6195-16, LS6195-13 user manual Handset battery charging, Displays Put in charger

Contents

Complete user’s manual Registration Product news Table of contents Index Parts checklist Getting started Telephone base installation Handset battery installation This Side UP / CE Côté Vers LE Haut Handset battery charging Displays Put in charger Telephone base layout VOL Mute Find Handset Volume Handset layout INT Using the menu To enter the handset menu Telephone base settings Handset ringer volumeTelephone base ringer volume Press Select to choose Ringer volume Telephone settings Quiet modeTo set the quiet mode duration To turn off the quiet mode Set date and time Press Select to select LCD language LCD languageBase LCD language Voicemail number To set the voicemail number Key tone Clear voicemail indicatorsTo manually turn off the new voicemail indicators Dial mode Home area code Auto answer Using the handset Using the telephone baseTelephone operation Make a call Volume control Answer a callEnd a call Handset speakerphone Mute Call waitingTemporary ringer silencing To silence the handset ringer Temporary tone dialing Chain dialing Check voicemail Find handsetWebsite To start the paging tone To delete a redial number RedialTo review and dial a redial number Transfer a call To join a call Multiple handset useJoin a call in progress Intercom Answer an incoming call during an intercom callHS 1 is calling HS X is calling Call transfer using intercom Directory About the directory Press Delete to erase a digit Add a directory entryAdd contact Enter number Review directory entries Alphabetical search Dial a directory entry Edit a directory entry Delete a directory entry Delete contact? Reassign a speed dial slot Speed DialAssign a speed dial slot Dial a speed dial number Delete a speed dial entry Information about caller ID with call waiting Caller IDAbout caller ID Caller ID log Memory match Entries in CID XXX for a few seconds Missed call indicatorReview the caller ID log View dialing options Dial a caller ID log entry Save a caller ID log entry to the directory Delete caller ID log entries Caller ID log screen messagesTo delete one entry Caller ID log on Answering system settings Answering systemAnnouncement Record your own announcement Delete your announcement Answer on/off Call screening Number of rings 00 to Remote access codeMessage alert tone Recording time Using the answering system and voicemail together Answering system operationAnswering system and voicemail Handset, see To play messages on the handset on Message capacity New message indicationTo screen a call at the telephone base Options while a message is being recorded Call intercept Temporarily turn off the message alert tone Message playback To play messages at the telephone baseOptions during playback To play messages on the handset Delete all old messages Record, play and delete memosDelete all msg? To record a memo Remote access Command Description Appendix Expand your telephone systemAdd and register a handset To register a handset Deregister handsets To deregister all handsets Screen messages Appendix Handset and telephone base indicators Telephone base lightsHandset icons Telephone base icons Battery Operation Operating time Troubleshooting My telephone doesn’t work at all Cannot dial out Appendix Hear other calls while using my phone My calls cut in and out while I’m using my cordless handset My telephone does not receive caller ID when on a call System announces Time and day not set Cannot retrieve voicemail messages Important safety instructions Operating range Precautions for users of implanted cardiac pacemakersECO mode Maintenance About cordless telephones Rbrc seal FCC, Acta and IC regulations FCC Part FCC Part 68 and Acta Industry Canada Limited warranty What does this limited warranty cover? How do you get warranty service? Technical specifications Index Index All rights reserved. Version 1 09/12 91-006037-010-100