TABLE OF CONENTS |
|
INSTALLATION | 4 |
COMPONENT LOCATION | 5 |
948RE AND AGE48 CONTROL PANEL | 5 |
CONTROL PANEL | 6 |
BULLNOSE | 6 |
HEAT SHIELD | 7 |
BACK PANEL | 7 |
THERMOSTAT | 7 |
THERMOSTAT TROUBLESHOOTING | 8 |
SYMPTOM – NO POWER TO THE BURNER SOLENOID | 8 |
SYMPTOM – GRIDDLE SURFACE TEMPERATURE IS MORE THAN ±15°F OF |
|
THERMOSTAT SET POINT | 8 |
THERMOSTAT REMOVAL | 8 |
THERMOSTAT CALIBRATION | 9 |
POWER ON/OFF SWITCH | 10 |
POWER SWITCH TROUBLESHOOTING | 10 |
SYMPTOM – NO POWER BEING SUPPLIED TO THE UNIT | 10 |
POWER SWITCH REMOVAL | 10 |
INDICATOR LIGHT | 10 |
INDICATOR LIGHT TROUBLESHOOTING | 10 |
SYMPTOM – LIGHT DOES NOT COME ON WHEN THERMOSTAT AND BURNER ARE ON | |
................................................................................................................................................ | 10 |
INDICATOR LIGHT REMOVAL | 11 |
FLAME SWITCH | 11 |
FLAME SWITCH TROUBLESHOOTING | 12 |
SYMPTOM – INDICATOR LIGHTS AND BURNER VALVES NOT WORKING | 12 |
HELPFUL HINT | 12 |
FLAME SWITCH REMOVAL | 12 |
HELPFUL HINT | 12 |
SPARK IGNITER MODULE | 12 |
SPARK IGNITOR TROUBLESHOOTING | 13 |
SYMPTOM – NO SPARK BETWEEN PILOT HEAD AND ELECTRODE | 13 |
SYMPTOM – ELECTRODE CONTINUALLY SPARKS AFTER PILOT IS LIT | 13 |
SPARK IGNITOR REMOVAL | 13 |
SOLENOID VALVES | 13 |
SOLENOID VALVE TROUBLESHOOTING | 14 |
SYMPTOM – NO GAS FLOW TO BURNER | 14 |
SOLENOID VALVE REMOVAL……………………………………………………………………… 14 | |
PILOT VALVE | 14 |
PILOT VALVE TROUBLESHOOTING | 14 |
SYMPTOM – PILOT WILL NOT LIGHT | 14 |
PILOT ASSEMBLY REMOVAL | 15 |
HELPFUL HINT | 15 |
BURNER | 15 |
BURNER TROUBLESHOOTING | 16 |
SYMPTOM – ALL BURNERS HAVE A LOWER OR HIGHER FLAME THAN NORMAL | 16 |
SYMPTOM – ONE OR MORE BURNERS HAVE LOWER FLAME LEVEL THAN THE |
|
OTHERS | 16 |
- 2 -
