Intel A31032-001 manual Troubleshooting

Troubleshooting

Item	Symptom		Probable Cause	Remedy
1	Server and/or	•	Unit is in	• If the Inline LED is not illuminated
			Bypass mode.	(solid or blinking) take the 7110/
	Network LEDs not
				7115 out of Bypass mode by either
	illuminated.	•	Improper
				pressing the Bypass switch on the
			cabling.
				unit’s front panel or using the CLI’s
				inline command.
				• Depending on what type of
				equipment the 7110/7115 is
				connected to, either straight-
				through or crossover Cat-5 network
				cables are required for both Network
				and Server ports. Switch out the
				different cable types at each port
				until both Network and Server LEDs
				are illuminated.