Intel A31032-001 manual Command Description Show rscwindow, Set utlwindow, Set utlhighwater

C H A P T E R 5 Command Reference

Command	Description
show rsc_window	Display current Refused SSL Connections Alarm interval.
	Syntax:
	Intel 7115> show rsc_window
	Check refused SSL connections [secs]: 10
set utl_window	Set interval (window) at which the device checks for exceeded
	utilization thresholds (CPU load, Connections per Second, or Total
	Open Connections and, if any are detected, issues a Utilization
	Threshold Alarm. (Range: 5-65000 seconds, default: 15)
	NOTE: The data collected for utilization threshold metrics tends
	to be bursty,so a smoothing algorithm is used to prevent continuous
	alarms.The utilization window is a user-specified sliding interval
	during which data is collected and averaged. Consequently, shorter
	intervals are likely to result in some extraneous alarms.
	NOTE: See also set utl_highwater and set utl_lowwater, this
	section.
	Syntax:
	Intel 7115> set utl_window <sec>
	where <sec> is the number of seconds of the desired interval.
set utl_highwater	Set the Utilization Threshold Alarm high-water value. Expressed
	as a percentage, the high-water value represents the highest CPU
	utilization, Connections per Second, or Total Open Connections
	required to trigger a UTL Alarm. (Range: 2-100%, default: 90)
	NOTE: See also set utl_window and set utl_lowwater, this section.
	Syntax:
	Intel 7115> set utl_highwater <%>
	where <%> is the percentage defining the upper threshold of CPU
	utilization, Connections per Second, or Total Open Connections
	required to trigger a Utilization Threshold Alarm.

5-35