Intel A31032-001 Status Check, Admin Terminal Connection, Network and Server LEDs, Inline LED

C H A P T E R 2 Intel® NetStructure™ 7110/7115 e-Commerce Accelerator User Guide

Status Check

Before proceeding to the PC Initialization section, take a moment to verify that the 7110/7115 is correctly connected.

Network and Server LEDs

Verify that the Network and Server LEDs are both illuminated. If one or both are not, refer to the Troubleshooting section at the end of this chapter.

Inline LED

A blinking Inline LED indicates that the system is online in Fail-safe mode. Refer the Troubleshooting section at the end of this chapter or Appendix B, “Failure/Bypass Modes.”

Admin Terminal Connection

Run HyperTerminal§ or a similar terminal emulator on your PC. The steps below are illustrative of HyperTerminal§. Other terminals will require different procedures.

1.Use the serial cable provided with the 7110/7115 to connect the device’s serial port (the left-hand serial port labeled “Console”) to the serial port of any terminal. (A PC running Windows HyperTerminal§ is used here as an example.)

Power	Error	Overload	Activity	Network Link	Inline	Server Link
(green)	(red)	(amber)	(green)	(green)	(green)	(green)

Console	Aux Console	Network Link	Server Link
		(RJ45)	(RJ45)

Figure 2-3: Front Panel Connectors and LEDs

2-4