Intel A31032-001 manual Command Description Set utllowwater, Show utlwindow, Show utlhighwater

C H A P T E R 5 Intel® NetStructure™ 7110/7115 e-Commerce Accelerator User Guide

Command	Description
set utl_lowwater	Set the Utilization Threshold Alarm low-water value. Expressed as
	a percentage, the low-water value represents the lowest CPU
	utilization, Connections per Second, or Total Open Connections
	required to trigger a UTL Alarm. (Range: 2-100, default: 90)
	NOTE: See also set utl_window and set utl_highwater, this
	section.
	Syntax:
	Intel 7115> set utl_lowwater <%>
	where <%> is the percentage defining the lower threshold of CPU
	utilization, Connections per Second, or Total Open Connections
	required to trigger a Utilization Threshold Alarm.
show utl_window	Display the current Utilization Threshold Alarm window.
	Example:
	Intel 7115> show utl_window
	Utilization window set [secs]: 10.
show utl_highwater	Display the Utilization Threshold Alarm’s current upper threshold.
	Example:
	Intel 7115> show utl_highwater
	Utilization High water mark [%]: 80
show utl_lowwater	Display the Utilization Threshold Alarm’s current lower threshold.
	Example:
	Intel 7115> show utl_lowwater
	Utilization Low water mark [%]: 60
set ovl_window	Set interval (window) at which the device checks for overloads
	resulting in the device executing a spill or throttle and, if any are
	detected, issues an Overload Alarm. (Range: 5-65000, default: 15)
	Syntax:
	Intel 7115> set ovl_window 10

5-36