Intel A31032-001 manual Monitoring Reports, Report Configuration, Monitor report format

C H A P T E R 7 Monitoring

Monitoring

Monitoring Reports

A monitoring report is one line of user-configurable text displayed at the console at a user-configurable interval of between five and 65000 seconds. The interval default is 15 seconds.Console Configuration

Monitoring reports are disabled by default, and are enabled with the CLI monitor... command set. The monitoring application is aware of the port on which the enable command arrives, and accordingly sends reports to that same port, thus monitoring reports are displayed on the same console from which the feature is enabled.

Report Configuration

You can specify the fields to be displayed in each report. Reports begin with the letter “M” (for monitor report, to distinguish them from alarm reports) and the timestamp. The other fields available are user-selectable via a CLI command see “CLI Commands” this below in this section). The standard default fields are mode, failmode, CPU, SSLCS, and OVR. Monitor reports are disabled by default.

Monitor report format:

M:yyyymmddhhmmss:mode:failmode:CPU;i,k,a:SSL

CS;c,m,t:OVR;r,c,m,t:

NetIF;s:SvrIF;s:BES;c,m,t;BDS;c,m,t

Where:

M Monitor report

yyyymmddhhmmss Timestamp

mode Bypass mode status [INLINEBYPASS]

failmode Fail mode status [SAFETHRU]

CPU;i,k,a CPU%; (i)dle, (k)ernel, (a)pplication

SSLCS;c,m,t SSL Connections per Second; (c)urrent, (m)ax, (t)otal

OVR;r,c,m,t Overload events; (r)esponse [SPILTHRT], (c)urrent, (m)ax,

7-13