Intel A31032-001 manual Bypass Button, Fail-through Switch Security Level

A P P E N D I X B Intel® NetStructure™ 7110/7115 e-Commerce Accelerator User Guide

	LEDs
Network Link	Inline	Reset
	(green) Server Link

Network Link Server Link Bypass

Fail-Through switch

Figure B-1: Front Panel Detail: Failure/Bypass Mode Controls and

Indicators

Bypass Button

Forcing a bypass of the 7110/7115 may be necessary when certain actions must be performed offline (e.g., configuration changes, entering certificates, or problem isolation).

To force a bypass of 7110/7115 processing, push the Bypass button ON. The Network Link, Inline, and Server Link LEDs are off in Bypass mode. ON disables the 7110/7115’s ability to process e- Commerce traffic. The mode of the Fail-through switch controls whether traffic continues to flow unprocessed between the client and the server (discussed below).

Fail-through Switch (Security Level)

This switch allows the user to control what happens in the event of a failure. It is located in a recess between the network link and server link connectors. Use a small screwdriver or paper clip to manipulate the switch. The two options are to either let traffic flow through the 7110/7115 in the event of a failure (or the Bypass Switch being on)

B-2