Intel A31032-001 Alarm Types, ESC Encryption Status Change Alarm, Alarm Modifiers and Messages

C H A P T E R 7 Alarm Types

For example:

Intel 7115> set alarms

Select monitoring fields (all, esc, rsc, utl, ovl, nls) [all]: all

Intel 7115> show alarms

All alarms are enabled.

Intel 7115> set alarms none

Intel 7115> show alarms

All alarms are disabled.

Alarm Types

The configurable alarm types are detailed in separate sections below.

ESC: Encryption Status Change Alarm

When enabled, an alarm is issued when the device is changed between INLINE and BYPASS modes. This change can be made from CLI using the commands, inline or bypass, or at the device’s front panel by pressing the BYPASS button.

Format:

A:yyyymmddhhmmss:ESC:HDWRCONBCONIFNTB

FNTIAPPR:/*message*/

Where:

A:identifies the message as an alarm. yyyymmddhhmmss: is the timestamp.

ESC: identifies the message as an Encryption Status Change Alarm.

Alarm Modifiers and Messages:

HDWR: indicates crypto card failure

CONB: indicates console-controlled bypass

CONI: indicates console-controlled inline

7-3