Intel A31032-001 manual Operational Commands, Command Description Bypass, Inline

C H A P T E R 5Command Reference

	Operational Commands
Command	Description
bypass	Enables bypass mode, in which traffic flows through 7110/7115
WARNING: Do not issue	without being processed. See Failure/Bypass Modes in Appendix
	B for details. See the inline command below for reversing bypass.
the bypass command from a
remote management session	Example:
(Telnet or SSh). Doing so
will result in an immediate	Intel 7115> bypass
disconnect from the 7110/
7115.	The LED labeled “inline” on the 7110/7115’s front panel turns off
	when bypass is enabled.
	NOTE: The 7110/7115 can be placed in bypass mode
	simultaneously with the bypass switch and the CLI’s bypass
	command. When this occurs, you must use both the bypass switch
	and the CLI’s insert command to return the unit to inline mode.
inline	Enables inline mode, in which the 7110/7115 processes traffic
	normally. (As opposed to bypass mode, in which traffic may flow
	through the device unprocessed.)
	Example:
	Intel 7115> inline
	The LED labeled “inline” on the 7110/7115’s front panel is
	illuminated when inline mode is enabled.
	NOTE: Other factors may preclude the use of inline mode. See
	Failure/Bypass Modes in Appendix B.

5-25