Intel A31032-001 manual Command Description Set telnet, Show telnet, Set telnetport

C H A P T E R 5 Intel® NetStructure™ 7110/7115 e-Commerce Accelerator User Guide

Command	Description
set telnet	Enables or disables Telnet sessions. When this command is set to
	“enable” and an IP address is assigned to the 7115’s network
	interface, you can access the device’s CLI via remote Telnet
	session. When disabled, the device refuses Telnet connections. The
	console prompts for any missing parameters. Default: disable.

Syntax:

	Intel 7115> set telnet enable
	Need an IP address to start Telnet service.
	Enter IP Address [209.218.240.67]:
	10.1.2.124
	Need a netmask to start Telnet service.
	Enter Netmask [255.255.255.0]:
	Optional Default Route to start Telnet
	service.
	Enter Default Route (’none’ to delete)
	[none]:
	Telnet Services started.
	Intel 7115>
show telnet	Displays current telnet status: enabled or disabled.
	Example:
	Intel 7115> show telnet
	Telnet: Enabled
set telnet_port	Set the port on which Telnet connections are accepted. (Default
	port: 23.)
	Syntax:
	Intel 7115> set telnet_port <port>
	where <port> is the number of the port to which Telnet sessions
	will connect.

5-28