Remote Management

NOTE: Remote management functions can be enabled and configured only through the local serial console.

Overview

The current software release allows you to remotely manage the 7110/7115. Remote management is available via three protocols:

Telnet

Secure Shell (SSh)

SNMP

When enabled, remote management allows you to access the device’s Command Line Interface (CLI) from Telnet or SSh sessions running on remotely located machines. Up to five remote sessions can be configured, including both Telnet and SSh sessions (Default: 5). Before you can use the device’s remote management function, you must enable and configure it at the local serial console. Remote management requires that the device’s network interface be assigned an IP address, unlike earlier versions of the 7110.

Remote SNMP management is supported to the extent of allowing control of the System group of MIB-II.

Page 107
Image 107
Intel A31032-001 manual Remote Management, Overview