89

Appendix

Mounting the TV on a wall

To use this TV mounted on a wall, remove the AC cord holder and the screws at the 4 locations on the rear of the TV,

and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.

• Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
• You can ask qualified service personnel about using an optional bracket to mount the TV to a wall.
• When you mount the TV on a wall, you should attach the supporting post.
• Detach the AC cord holder on the rear of the TV before mounting the TV on a wall.

EWall mount audio setup

When you mount the TV on a wall, you can adjust the sound to a more suitable one by setting this function to “Yes”.

Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Wall mount audio setup”.

Wall Mount Kit Specifications

Standard dimensions for wall mount kits are shown below.

75
275
200
400
400
360
160
70
WALL
WALL MOUNT KIT
WALL MOUNT KIT
NOTE
• When mounting your TV on a wall, avoid that the DuoBass
unit on the rear does not come in contact with the wall. Use
a Wall Mount Kit with bracket thickness*1 of 70 mm or more
and inter-bracket space*2 of 320 mm or more.
58
300
400
WALL MOUNT KITWALL MOUNT KIT
Duo Bass
(VESA pitch)
Thickness*1
70 or more
320 or more
Space*2
SCREW
CABINET
DEPTH OF
MOUNTING HOLES
WALL MOUNT
UNIT
MOUNTING
HOLES

For the screws, refer to the table shown below.

Standard screws M6 (Use 1.0 pitch screws.)
Length
(Depth of mounting holes) 12
Quantity 4 pcs.
NOTE
• Do not mount the TV at a tilt.
• To use this TV mounted on a wall, remove the cable tie as
needed.
• Do not use screws that do not comply with the VESA
standard screw specifications.
• Do not use screws that are longer than the standard length.
Screws that are too long may cause damage to the inside of
the TV.
• Do not fasten the screws too firmly or loosely. This may
damage the product or cause the product to fall, leading
to personal injury. SHARP is not liable for these kinds of
accidents.
• SHARP is not liable for product damage or personal injury
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
Do not install the wall mount kit while your TV is
turned on. It may result in personal injury due to
electric shock.
LC-70UD1X_EN_book.indb 89LC-70UD1X_EN_book.indb 89 10/18/2013 9:43:26 AM10/18/2013 9:43:26 AM