7

Protection against overturning

There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tip-
resistant measurement for your safety.
Anchoring the TV to the wall or a pillar

1Affix the TV to the wall or a pillar using

extra strong ties and cup hooks. View from the top
2
1
3
Tie (commercially
available)
Tie (commercially
available)
Cup hook
(commercially available)
Fixing the TV to the table

1Place the TV on the table.

2Pull the attached restraining bracket out so that it

is at a 90 degrees angle.

3Insert commercially available screw in the hole of

the restraining bracket and tighten the screw to
secure the TV to the table.
• Use commercially available screw to firmly secure the TV.
CAUTION
• As this product is heavy, use a table that is wide
enough to support the product and capable of
withstanding the product’s weight. The table should be
set where it will not be overturned.
• Be sure to use at least two people when moving the TV.
Stand
Screw
(commercially
available)

Preparation

LC-70UD1X_EN_book.indb 7LC-70UD1X_EN_book.indb 7 10/18/2013 9:42:56 AM10/18/2013 9:42:56 AM