52
Network function
Option

Key lock

This function allows you to lock the buttons on the TV
or remote control unit in order to prohibit children from
changing the channel or volume.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Key lock”.
Item
Off Unlocks the buttons.
RC control lock Locks all buttons on the remote control
unit.
Button control
lock
Locks the buttons on the TV except the
power switch.
NOTE
• You cannot set both “RC control lock” and “Button control
lock” at the same time.

ECancelling the lock

Press @ on the TV and set to “Off” to cancel the
“RC control lock”. Press @ on the remote control
unit and set to “Off” to cancel the “Button control lock”.
NOTE
• See page 18 for the functions of the TV control panel buttons.
• To cancel “Button control lock”, use the remote control.

Playing Back Files from a Portable

Device or PC

With the remote playback function, you can use your
portable device to playback pictures, video and music on
the home network server.
• The TV has obtained DLNA’s Digital Media Renderer (DMR)
certification.
• To use the remote playback function, your portable device or
PC must be a DLNA Certified Digital Media Controller.
• Please ensure that the TV and portable device or PC are in
the same network environment, and set portable device as
the server of TV.
For the network setting of TV, please refer to pages 52 – 54.

Easy share setting

1Go to “HOME” > “TV Menu” > “Setup” > “View

setting” > “Network setup” > “Easy share setting”.

2Press a/b to select the item to be adjusted, and

then press ? to set.

ESet easy share permission

Before this function can be used, you need to set the TV
to the status of being able to receive contents.
Item
On Receiving and playing contents from
portable device or PC are allowed.
Off Receiving contents from portable device
or PC is not allowed.

ETime out setting

This sets the time until the TV returns automatically to TV
mode after remote playback ends.
Item
10 sec./60 sec.
When the set time has elapsed after
remote playback ends, the TV returns
automatically to TV mode.
No Select this to manually switch the TV
after remote playback ends.
NOTE
• This function may not work while an Internet application is
being used.
• Due to reasons including network environment, it may take
some time for the TV to start playing after the dragging
operation.
• If the wireless signals are too complicated, or multiple wireless
access points are available, operations may not be performed
properly due to signal interference.
• Some file formats may not match. For the file formats
supported by this function, please see Home network
server compatibility on page 67.
• Ultra HD media is not supported via DLNA.
Useful viewing functions
LC-70UD1X_EN_book.indb 52LC-70UD1X_EN_book.indb 52 10/18/2013 9:43:12 AM10/18/2013 9:43:12 AM