54
NOTE
• When using the SHARP wireless LAN USB adapter (supplied
accessory), try to provide as much free space around the
device for best performance.
• A wireless LAN connection and performance cannot be
guaranteed for all residential environments. In the following
cases, the wireless LAN signal may be poor or drop, or the
connection speed may become slower.
fWhen used in buildings made with concrete, reinforced
steel, or metal
fWhen placed near objects that obstruct the signal
fWhen used with other wireless devices that emit the same
frequency
fWhen used in the vicinity of microwave ovens and other
devices that emit a magnetic field, electrostatic charge, or
electromagnetic interference
• Make sure the firewalls in your network allows access to the
TV wireless connection.
• Operations cannot be guaranteed when used with access
points that do not have Wi-Fi® certification.
• A wireless LAN access point is required to connect the TV to
the Internet using a wireless LAN. See the operation manual
of your access point for setup.
• A stable connection speed is required to play back streaming
content. Use an ETHERNET connection if the wireless LAN
speed is unstable.
• Before transferring to a third party or disposal, be sure to
initialise the wireless LAN settings.
E How to connect
AUDIO (L/R)
1Switch on your router before starting the network
installation.
2Connect the wireless LAN USB adapter (supplied
accessory) to the USB 2 (WIRELESS LAN) port on
the rear of the TV.
When using Easy setup function
ERefer to “How to connect”.
3Go to “HOME” > “TV Menu” > “Setup” >
“View setting” > “Network setup” > “LAN setting”
> “Easy setup”.
4Press c/d to select “Yes”, and then press ?.
5Press a/b to select “Wireless”, and then press
?.
6Please input according to direction of a screen,
and finally input “Complete”.
When using Manual setup function
ERefer to “How to connect”.
3Go to “HOME” > “TV Menu” > “Setup” >
“View setting” > “Network setup” > “LAN setting”
> “Manual setup” > select “Yes” > “Connection
type”.
4Press c/d to select “Wireless”, and then press
?.
5Select “OK” to confirm.
6Press a/b to select “Wireless setup”, and then
press ?.
7Press c/d to select “Change”, and then press
?.
8Press a/b to select “WPS push button”, and
then press ?.
WPS push button
WPS PIN code
Selecting wireless network
Registering wireless network
• To establish the connection manually, select “WPS
PIN code”. Follow the on-screen instructions and the
operation manual of the router/access point.
9Select “Next” to proceed.
0
Press the WPS button on the router/access point.
When you press the WPS button, a progress
bar will appear on the display. Wait until the
connection is established.
Q
Select “OK” when the connection details are
displayed.
• If you have failed to connect to the internet in the above
operation, an error message will appear. In this case,
press b to return to the normal TV screen and check
the relevant settings.
NOTE
• To connect your TV to the internet, you must have a
broadband internet connection.
• There is no need to enter the security key for subsequent
connections to the wireless network.
• If your access point is set to a stealth mode (that prevents
detection by other devices), you may not be able to establish
a connection. In this case, disable the stealth mode on the
access point.
• If you want to change the IP settings manually, go to “HOME”
> “Network setup” > “IP setup” and follow the on-screen
instructions and the operation manual of the router.
• See page 55 to check the wireless LAN USB adapter
specifications.
Network function
LC-70UD1X_EN_book.indb 54LC-70UD1X_EN_book.indb 54 10/18/2013 9:43:13 AM10/18/2013 9:43:13 AM