42

Channel settings

Go to “HOME” > “TV Menu” > “Setup” > “View
setting”.
Setup
Network setup
Auto installation
View setting
Channel settings
CH list
Menu
Select recording device
[USB-HDD]
:Back:Enter
: Select
View setting

Auto installation

The TV automatically detects and stores all available
services in your area. This function also allows you to
perform the channel setting and reconfigure the settings
after the initial auto installation has been completed.

1Go to “HOME” > “TV Menu” > “Setup” > “View

setting” > “Auto installation”.

2If you have already set the password, enter it here.

• See page 45 for setting a password.

3Press c/d to select “Yes”, and then press ?.

4Press a/b/c/d to select the desired language,

and then press ?.
• You do not need to do anything during the auto search.

5Press c/d to select “Digital Search” or “Analogue

Search”, and then press ?.
• When the country setting is set to “Australia”, only
“Digital Search” is available.
NOTE
• You cannot set the HOME/STORE setting and the country
setting in “Auto installation” in the “Setup” menu. If you want
to reconfigure those settings, automatically execute initial auto
installation after executing “Reset” from the “Setup” menu.
• The current country setting is displayed on the screen.
• In the setting of some country, selecting of “Digital Search” or
“Analogue Search” may not be shown.
View setting

Programme setup

You can run the auto search procedure again at any time
by accessing the “Setup” menu and “Programme setup”.
Channels can be tuned automatically or manually.

Digital setting (DTV only)

You can reconfigure the DTV channel settings
automatically or manually.

1

Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Channel settings” > “Programme
setup”.

2If you have already set the password, enter it here.

• See page 45 for setting a password.

3The “Digital setting” screen displays, and then

press ?.

4Press a/b to select the desired menu item, and

then press ?.

5Press c/d to select “Yes”, and then press ?.

Additional search

Use this menu to add new services automatically after
“Auto installation” has been completed.
• Start searching channels after selecting the colour system
and sound system.

Manual search

Add new services within a specified frequency band.
• Enter the frequency using 0–9 numeric buttons.

Manual adjust

Configure various settings for each service using the
Colour (R/G/Y/B) buttons.
Service
No.
Lock
Service
Name
Lock CH
skip
Old
LCN
CH skip SortDelete

1Press a/b to select the desired service.

2Press the Colour button on the remote control

unit corresponding with the item you want to
reconfigure.
• The ✓ mark indicates the operation is set to on. Each
time the Colour button is pressed, you can switch the
corresponding operation on/off.

Basic adjustment

LC-70UD1X_EN_book.indb 42LC-70UD1X_EN_book.indb 42 10/18/2013 9:43:08 AM10/18/2013 9:43:08 AM