Sharp LC70UD1X Viewing 3D images, Receiving a 3D image signal that can be detected automatically, 1Go to HOME > TV Menu > Setup > Option , 2Turn on the power of the 3D glasses, and then , Switching 3D to 2D mode, 1Press 3D during the 3D mode. 2Select Yes, and then press ? to switch to 2D , 3Take off the 3D glasses and turn off the power of , Receiving a 3D image signal that cannot be detected automatically, 1Press 3D., 2Press c/d to select 3D or 2D, and then press

77
Viewing 3D images
MENUMEN
U
NOTE
• The TV screen may temporarily become black when the TV is
trying to detect a 3D image signal and when switching from
3D to 2D mode.
Receiving a 3D image signal that
can be detected automatically
The image signal may contain a 3D identification signal.
You can enable the TV to automatically detect the 3D
image type (Page 76).
1Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “3D setup” > “3D auto change”.
EWhen “3D auto change” is set to “Mode 1”
or “Mode 2”
• The 3D display format is detected automatically and the
appropriate 3D image is displayed.
EWhen “3D auto change” is set to “Off”
1The confirmation message is displayed. Press 3D.
2Press c/d to select “Yes”, and then press ?.
2Turn on the power of the 3D glasses, and then
wear the 3D glasses.
• Press the power button for at least two seconds.
• The LED light blinks three times.
NOTE
• If you do not want to switch to 3D mode automatically, set
“3D auto change” to “Off”.
• When the TV is receiving a 3D image signal that can be
detected automatically, the 3D mode icon is displayed in the
channel display.
Switching 3D to 2D mode
When you press 3D while you are watching the TV in 3D
mode, the TV switches to 2D mode.
1Press 3D during the 3D mode.
2Select “Yes”, and then press ? to switch to 2D
mode.
3Take off the 3D glasses and turn off the power of
the 3D glasses.
• Press the power button for at least two seconds.
• The LED light lights for two seconds.
NOTE
• If the input signal switches to 2D, 2D images are displayed
automatically.
• 3D mode is cancelled automatically when the setting is
changed, input source is changed, the input signal resolution
is changed or the power is turned off.
Receiving a 3D image signal that
cannot be detected automatically
When the TV receives a 3D image signal that cannot be
detected automatically, you can select between 3D and
2D image viewing.
1Press 3D.
• A screen appears prompting you to select between 3D
and 2D image viewing.
2Press c/d to select “3D” or “2D”, and then press
?.
ETo view in 3D mode
1Press c/d to select the 3D signal type (“2D s 3D”,
“Side by Side” or “Top and Bottom”), and then press
?.
Side by Side Top and Bottom
• If you select the same system as that of the input signal,
3D images are displayed.
• You can select only “2D s 3D” in TV mode.
2Turn on the power of the 3D glasses, and then wear
the 3D glasses.
• Press the power button for at least two seconds.
• The LED light blinks three times.
ETo view in 2D mode
• Switching from 3D to 2D mode.
Press c/d to select the 2D signal type (“Side by Side”
or “Top and Bottom”), and then press ?.
Side by Side Top and Bottom
• If you select the same system as that of the input signal,
2D images are displayed.
Enjoying 3D image viewing
LC-70UD1X_EN_book.indb 77LC-70UD1X_EN_book.indb 77 10/18/2013 9:43:22 AM10/18/2013 9:43:22 AM