74
Enjoying 3D image viewing

Using the 3D glasses

Before using the 3D Glasses

Before using the 3D glasses for the first time, remove the
insulating sheet attached to them.

Attaching the Nose Pad

Attach either of the supplied nose pads as needed (such
as when the glasses do not fit properly). The glasses
come with a large and small nose pad.
Removing the nose pad Attaching the nose pad

Using the 3D glasses

Pairing the 3D glasses

To view 3D images, it is necessary to pair the 3D glasses
and TV.
• To confirm pairing of the 3D glasses and TV, make sure that
3D images are displayed on the TV screen.
• When the power button is pressed for 2 or more seconds
with the power off, pairing with the TV starts. When pairing
is completed successfully, the LED lights up in green for 3
seconds.
• To switch between 2D and 3D modes, briefly press the power
button.
50 cm–2 m
NOTE
• When paired, make sure that the 3D glasses are kept at
a distance of 50 cm–2 m from the TV. If too close, pairing
cannot be performed.

Switching to 3D and 2D Mode

When viewing 3D images, you can press the power
button to switch between 2D and 3D modes. This is
useful when several people are viewing 3D images on the
same TV with some people wanting to watch in 3D and
some people wanting to watch in 2D.

EViewing 2D images

When you press and hold for less than 2 seconds
while viewing 3D images, the LED light blinks in
red and the 3D images switch to 2D images.

EViewing 3D images

When you press and hold for less than 2 seconds
while viewing 2D images, the LED light blinks in
green and the 2D images switch to 3D images.

Usage Range of the 3D Glasses

The 3D glasses can be used by receiving a signal sent
from the TV.
The 3D glasses turn off automatically after 15 seconds if
no signal is received from the TV.

EOperating range

From directly the TV: approx. 5 m (within approx.
30° horizontally and 20° vertically)
LC-70UD1X_EN_book.indb 74LC-70UD1X_EN_book.indb 74 10/18/2013 9:43:20 AM10/18/2013 9:43:20 AM