47

Optional features settings

Go to “HOME” > “TV Menu” > “Setup” > “Option”.

Setup
Option for view
Option
3D setup
CH list
Menu
Terminal setting
EPG setup
:Back:Enter
: Select

Selecting the picture size manually

Option

Wide mode

You can select the picture size. Selectable picture size

varies with the type of signal received.

1Go to “HOME” > “TV Menu” > “Setup” > “Option”

> “Option for view” > “Wide mode”.

• You can also select an item by pressing WIDE on the
remote control unit.
• The menu lists the “Wide mode” options selectable for
the type of video signal currently received.

2Press a/b to select the desired item.

• As you toggle the options, each is immediately reflected
on the screen. There is no need to press ?.
Item (for SD [Standard-Definition] signals)
Normal Keeps the original aspect ratio in a full
screen display.
Zoom 14:9
For 14:9 letterbox pictures. A thin side
bar appears on each side, and you may
also see bars on the top and bottom
with some programmes.
Panorama
In this mode, the picture is stretched
toward each side of the screen. The
picture may appear similar to “Full”
depending on broadcast signals.
Full For 16:9 squeeze pictures.
Cinema 16:9
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Cinema 14:9
For 14:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Original Displays an image with the same size of
original picture.
Item (for HD [High-Definition] signals)
Full Displays with an overscan image. Crops
all sides of screen.
Underscan
Displays with an underscan image only
when receiving a 720p/1080p/1080i
signal. Displays with the High-Definition
image adjusted optimally. Noise may
appear on the edge of the screen with
some programmes.
Dot by Dot
Displays an image with the same number
of pixels on the screen when receiving
4K signals only.
NOTE
• “Zoom 14:9” and “Cinema 14:9” will appear only for TV
mode.
• Some items do not appear depending on the type of received
signal.
• Refer to page 68 for PC signals inputs.
• The Wide mode is fixed to “Dot by Dot” when 4K signal is
input.

Selecting the picture size

automatically

Option

Auto wide (DTV only)

The “Auto wide” allows the TV to switch automatically

among the different picture size.

Go to “HOME” > “TV Menu” > “Setup” >

“Option” > “Auto wide”.

NOTE
• Use “Wide mode” if an image does not switch to the
appropriate picture size. When the broadcast signal contains
no aspect ratio information, the function will not work even if
enabled.
• This function is available for 3D images converted from 2D
images or normal 2D images.

Useful viewing functions

LC-70UD1X_EN_book.indb 47LC-70UD1X_EN_book.indb 47 10/18/2013 9:43:10 AM10/18/2013 9:43:10 AM