Intel A31032-001 manual To reverse this process, Intel 7115set egressmac none

C H A P T E R 4 Intel® NetStructure™ 7110/7115 e-Commerce Accelerator User Guide

Scenario 4—Different Ingress and Egress Routers

This scenario describes the configuration of a 7110/7115 when the ingress and egress traffic paths are different. This scenario includes:

•One or more servers

•One or more 7110/7115s (Multiple commerce accelerators can be cascaded in this configuration.)

•One or more ingress routers

•One egress router

Intel® NetStructure™ 7110/7115

e-Commerce Accelerator

Ingress Router	Switch
Client
Egress Router

Server

Figure 4-4: Installation with Ingress and Egress Routers

Procedure for Scenario 4

NOTE: Execute an “arp –a” on the server to display the MAC address of the default gateway. This is the address you should use.

1.Configure your 7110/7115 (as described in any of the previous scenarios).

2.Determine the MAC address of the egress router you wish to route outbound traffic through.

3.At the CLI prompt, enter the default egress router.

Intel 7115>set egress_mac 00:11:22:33:44:55 Egress MAC set to 00:11:22:33:44:55

Intel 7115>config save

Saving configuration to flash...

Configuration saved to flash Intel 7115>

4.To reverse this process:

Intel 7115>set egress_mac none

4-10