Intel A31032-001 manual Command Description Show telnetport, Set sshport, Show sshport

C H A P T E R 5 Command Reference

Command	Description
show telnet_port	Display the port on which Telnet sessions are currently accepted.
	Example:
	Intel 7115> show telnet_port
	Telnet port: 23
set ssh	Enable or disable Secure Shell (SSh) sessions. When this
	command is set to “enable” and an IP address is assigned to the
	7115’s network interface, you can access the device’s CLI via
	remote SSh session. When disabled, the device refuses SSh
	connections. Default: disable.
	Syntax:
	Intel 7115> set ssh <enabledisable>
show ssh	Display current SSh status: enabled or disabled.
	Example:
	Intel 7115> show ssh
	SSH: Disabled
set ssh_port	Set the port on which SSh connections are accepted. (Default port:
	22.)
	Syntax:
	Intel 7115> set ssh_port <port>
	where <port> is the number of the port to which SSh sessions
	will connect.
show ssh_port	Display port on which SSh sessions are currently accepted.
	Example:
	Intel 7115> show ssh_port
	SSH port: 22.

5-29