Intel A31032-001 Alarms and Monitoring Commands, Command Description Set alarms, Show alarms

C H A P T E R 5 Intel® NetStructure™ 7110/7115 e-Commerce Accelerator User Guide

	Alarms and Monitoring Commands
Command	Description
set alarms	Enable all or a selection of the 7115’s alarms.
	Syntax:
	Intel 7115> set alarms
	<allescrscutlovlnls>
	where
	<all> enables all five of the 7115’s alarms.
	<esc> enables the Encryption Status Change Alarm.
	<rsc> enables the Refused SSL Connection Alarm
	<utl> enables the Utilization Threshold Alarm
	<ovl> enables the Overload Alarm
	<nls> enables the Network Link Status Alarm
	To disable all alarms, use none:
	Example:
	Intel 7115> set alarms all
	Intel 7115> show alarms
	Alarms set: esc rsc utl ovl nls
show alarms	Display the list of currently enabled alarms.
	Example:
	Intel 7115> set alarms none
	Intel 7115> show alarms
	Alarms set:
	NOTE: When no alarms are set (i.e., when none is specified in set
	alarms), the display shows an empty field.
set rsc_window	Set interval (window) at which the device checks for refused SSL
	connections and, if any are detected, issues an RSC Alarm.
	(Range: 5-65000 seconds, default: 15)
	Syntax:
	Intel 7115> set rsc_window <sec>
	where <sec> is the number of seconds of the desired interval.

5-34