Intel A31032-001 manual Command Description Set more, Nic, Set prompt, Set serial

C H A P T E R 5 Intel® NetStructure™ 7110/7115 e-Commerce Accelerator User Guide

Command	Description
set more	Set the page length of the console display. Default is 300.
	Syntax:
	Intel 7115> set more <n>
	where <n> is the desired number of lines. Valid inputs are 0 (to
	disable), or 23 or greater.
nic	Allows you to set the network interface card configuration.
	Example:
	Intel 7115> nic
	1 - auto
	2 - 10baseT, half duplex
	3 - 10baseT, full duplex
	4 - 100baseTX, half duplex
	5 - 100baseTX, full duplex
	Select media type [1]:
set prompt	Change the prompt from Intel 7115> to the desired prompt.
	Example:
	Intel 7115> set prompt
	Prompt [Intel 7115> ]: <Enter>
	Intel 7115>
set serial	Allows user to set the console port to monitor the CLI or the output
	logging, and set the speed, data bits, stop bits, and parity bits. The
	aux console port is fixed at 115200, 8, 1, N. This command returns
	the user to the “password” prompt after setting the console port.
	Example:
	Intel 7115> set serial
	Baud rate (9600/115200) [9600]: <Enter>
	Data bits (7/8) [8]: <Enter>
	Stop bits (1/2) [1]: <Enter>
	Parity (n/e/o) [n]: <Enter>
	Set serial parameters [y]: <Enter>
	Intel 7115>

5-46