Intel A31032-001 Port Mapping Commands, Command Definition Create block, Delete block, Show block

C H A P T E R 5 Intel® NetStructure™ 7110/7115 e-Commerce Accelerator User Guide

	Port Mapping Commands
	These commands are used to execute the operations described in
	Chapter 3’s Mapping and Blocking sections.
Command	Definition
create block	Create a block to preclude access to specified IP addresses or
	through specified ports. A single IP, a single port, or all ports can
	be blocked. If fewer than all ports are to be blocked, you must
	repeat the create block command for each one.
	Example:
	Intel 7115> create block
	Client IP to block [0.0.0.0]: 10.1.2.1
	Client IP mask [0.0.0.0]: 255.255.0.0
	Server IP to block [0.0.0.0]: 20.1.2.1
	Server IP mask [0.0.0.0]: 255.255.0.0
	Server Port to block: 80
	Server Port mask [0xffff]:<Enter>
	Intel 7115>
delete block	Delete a block specified by index number. Use show block (see
	below) to correlate existing blocks with their numbers.
	Example:
	Intel 7115> delete block 1
	Intel 7115>
show block	Display all existing blocks.
	Example:
	Intel 7115> show block
	--------
	blocks :
	---------
	(1) block 10.1.2.1 255.255.0.0 20.1.2.1
	255.255.0.0 80 0xffff
	----------

5-22