Manuals / Vulcan-Hart / Kitchen Appliance / Range

Vulcan-Hart ML-52953 PILOT LIGHTING AND ADJUSTMENTS Cont, Open Top Burners, Complete Shutdown

Models: ML-114555 ML-114554 ML-114556 ML-114553 ML-114557 ML-52954 ML-52948 ML-114957 ML-52949 ML-52951 ML-52952 ML-52950 ML-52947 ML-52953

1 52
Download 52 pages 49.32 Kb
Page 14
Image 14
PILOT LIGHTING AND ADJUSTMENTS (Cont.)

PILOT LIGHTING AND ADJUSTMENTS (Cont.)

OPEN TOP BURNERS

1.Turn main gas supply “ON”.

2.Wait 30 seconds and, using a taper, light the open top pilot (Fig. 10).

Fig. 10

3.If pilot fails to light, turn main gas supply “OFF”. Wait 5 minutes and repeat the above procedures.

4.Turn one open top burner valve “ON” to remove air from the gas line. Turn burner “OFF” when gas begins to flow.

OPEN TOP BURNER ADJUSTMENTS

TOOLS REQUIRED: Standard flat blade screwdriver.

1.After pilot is lit, turn open top burners “ON”.

2.Adjust the burner flame, if necessary, by rotating the adjustment screw of the pilot valve located on the manifold pipe (see Fig. 3). Rotate the screw clockwise to decrease and counterclockwise to increase the flame.

Nightly Shutdown: Turn burner valve “OFF”; pilot will remain lit.

Complete Shutdown

1.Turn burner valve “OFF”; pilot will remain lit.

2.Turn main gas supply “OFF”.

— 14 —

Page 13 Page 15
Page 14
Image 14
Vulcan-Hart ML-52953 PILOT LIGHTING AND ADJUSTMENTS Cont, Open Top Burners, Open Top Burner Adjustments, Complete Shutdown
Page 13 Page 15