HIGH LIMIT THERMOSTAT
Disconnect the electrical power to the machine and follow lockout / tagout procedures.
1.Remove the top four racks from the oven.
2.Remove the high limit thermostat cover/ mounting plate. It is located at the top of the oven cavity.
3.Disconnect the lead wires from the high limit thermostat. Remove the high limit thermostat from the cover mounting plate.
INTERIOR LIGHTS
Disconnect the electrical power to the machine and follow lockout / tagout procedures.
1.Remove the racks from the oven.
2.Unscrew the glass lens for the light being replaced, then unscrew the bulb.
LENS |
LENS |
OVEN CAVITY |
3.Replace bulb, then reverse the procedure to install.
Lamp Assembly
1.Remove the lens and bulb.
2.Remove the springs from the retaining tabs (two places) on the socket.
RETAINING TABS |
|
SPRING |
|
CROSS SECTIONAL VIEW |
4. | Remove the old RTV silicone from the cover | 3. | Depress the retaining tabs and pull the socket | |
| out from the oven, far enough to disconnect | |||
| and mating surfaces inside the oven cavity, |
| ||
|
| the lead wires. | ||
| and apply new RTV silicone before installing. |
| ||
|
|
|
| |
5. | Reverse procedure to install. | 4. | Remove the socket from the oven. | |
|
|
| ||
|
|
|
|
|
|
| – 18 – |
|
|
