VXI 82-0102-000 user manual CT-100C Mainframe Features, Mainframe Feature Locations

VXI Technology, Inc.

	CT-100C MAINFRAME FEATURES
FRONT PANEL FEATURES
POWER SWITCH
Feature 1	When elevated, the mainframe is in standby mode, where power is supplied to the
	mainframe, but not to the VXI modules.
	When depressed, power is supplied to both mainframe and VXI modules
VOLTAGE INDICATORS
Feature 2	Indicates whether specific backplane voltages are within specifications. See Figure 1-4
	for details.
FAN INDICATOR
Feature 3	Indicates whether the fan voltages are within specifications. See Figure 1-4for details.
REAR PANEL FEATURES
FAN SPEED SWITCH
Feature 4	Enables the user to vary the speed of the fan between HIGH and LOW. See Figure 1-3
	for details.
J200 CONNECTOR
Feature 5	AC power receptacle.
GROUND STUD
Feature 6	Used to electrical ground the mainframe.
J201 CONNECTOR
Feature 7	See Figure 1-5and Table 1-1for connector pin assignments.

1 2 3

Power	Voltage Monitors
	+5V +12V +24V	+5V Stby

-5.2V -12V -24V -2V FAN

0 1 2 3 4 5

CT-100C

VXI Mainframe

4

5

6

7

VXI Technology

!WARNING - TO PREVENT POSSIBLE ELECTRIC SHOCK HAZARD, DISCONNECT POWER CORD BEFORE REMOVING THE POWER SUPPLY MODULE FROM THE MAINFRAME.

ATTENTION - POUR EMPÊCHER LE RISQUE POSSIBLE DE DÉCHARGE ÉLECTRIQUE, DEBRANCHER LE CORDON DE SECTEUR AVANT D'ENLEVER LE MODULE D'ALIMENTATION D'ÉNERGIE DE L'UNITÉ CENTRALE.

WARNING - FOR PROTECTION FROM ELECTRIC SHOCK, THE GROUNDING CONNECTION

!IN THE POWER CORD MUST BE PROPERLY CONNECTED.

ATTENTION - POUR LA PROTECTION CONTRE LE CHOC ÉLECTRIQUE , LA PRISE DE TERRE AU SOL DANS LE CORDON DE SECTEUR DOIT ÊTRE CORRECTMENT RELIÉE.

WARNING - NO OPERATOR SERVICEABLE PARTS INSIDE. REFER SERVICING TO

!TRAINED SERVICE PERSONNEL.

ATTENTION - AUCUNES PIÈCES REPARABLES PAR UN OP ÉRATEUR À L'INTÉRIEUR. RÉFÉREZ L'ENTRETIEN AU PERSONNEL QUALIFI É.

FAN SPEED

J200

HIGH / LOW J201

MONITOR / CONTROL

100-240 VAC

10A MAX.

47 - 63 Hz

FIGURE 1-3: MAINFRAME FEATURE LOCATIONS

14 CT-100C Introduction