32
CUSTOMIZING TOOL BUTTONS
Select the PEN tab to change the functions assigned to the side switches and tip of your pen.
•At least one tool button should be set to the CLICK function.
•The tip must be set to CLICK in order to draw in most graphics applications.
Select the function to perform when pressing the upper or lower side switch.
The selected function occurs when you bring the pen tip within 10 mm (0.4 inch) of the tablet surface without touching the tablet and then press the upper or lower side switch.
Tip: To make
Drag the TILT SENSITIVITY. slider to change tilt sensitivity. Test the new setting in an application that supports tilt.
The tilt setting applies to both the tip and eraser of your tool.
Tilt is direction sensitive and can be used in some applications to control brush orientation or other characteristics.
Note: You can change how the side switch operates for right clicks or other click functions. See Advanced
32