ContentsIndex

48

All monitors are selected in the toggle sequence by default. Uncheck any monitor you want removed from the sequence.

The base mapping is the tablet and display mapping that is defined in the MAPPING tab.

By default, this includes all monitors unless you have defined a specific monitor as your primary monitor.

As you toggle to the next monitor, the active tablet area is mapped to that monitor (in pen mode).

Toggling one more time after the last selected monitor returns the system to the base mapping.

Important: When using application-specific settings with DISPLAY TOGGLE, be sure that each customized application in the APPLICATION list (including ALL OTHER) has a tool button assigned to DISPLAY TOGGLE. The easiest way to do this is to assign DISPLAY TOGGLE to an ExpressKey prior to creating any application-specific settings.

Any of the following actions will return the toggle sequence to the base mapping:

Launching a graphics application that supports pressure sensitivity.

Logging out of or rebooting the system.

Switching users (Fast User Switching).

Placing the system in sleep mode.

Changing the MAPPING or DISPLAY TOGGLE settings.

Changing the resolution or number of displays on your system.

Using the MODE TOGGLE... function.

Selecting PEN MODE or MOUSE MODE from the Radial Menu.

Tip: To toggle between monitors without including the ‘full display’ option, disable the first display on the DISPLAY TOGGLE tab. Then go to the MAPPING tab and set the current SCREEN AREA to the first display.

ContentsIndex

48