ContentsIndex

55

WIRELESS SETUP

Configure Intuos Pro for wireless operation.

1.If you have been using Intuos Pro as a wired tablet, disconnect the USB cable.

2.Turn the tablet over. Remove the wireless compartment cover(s). See (A).

Slide cover(s) away from tablet body to remove. Medium- and large-sized tablets are equipped with two covers: one for the Wacom wireless module, and one for the rechargeable battery. Small-sized tablets come with a single cover.

3. Install the wireless components.

 

A

 

 

• Install the battery. Align contacts (B) as

 

 

shown and press into place. See also

 

 

Battery replacement.

 

 

Note: Do not press straight down on the

 

 

battery to install it. Align the contacts and

B

 

press that end of the battery into place

 

 

 

before pressing down the other end.

 

 

• Install the wireless module. Lift away and

 

 

remove the wireless module spacer (C).

 

 

Slide the wireless module into the tablet,

 

 

ensuring the connector is fully seated (D).

 

 

Important: Save the module spacer. You

 

 

may need it as a tool for removal of the

C

D

wireless module. See Wireless module

removal.

 

 

• Replace the wireless compartment cover(s).

 

 

Align and slide into place (E).

 

 

• Connect the Wacom wireless receiver to an

 

 

active USB port on your computer or USB

 

 

hub (F).

 

 

 

E

F

4.If you have not already done so, turn on your computer and wait until the system has fully loaded.

5.Continue to connect wirelessly.

Establishing a wireless connection

Optimizing the wireless connection

ContentsIndex

55