ContentsIndex

60

POWER SAVING FEATURES

When configured for wireless operation, Intuos Pro uses a number of power saving features to conserve the tablet battery charge and improve performance.

Power saving mode

Tablet enters power saving mode after 2 minutes of no user input. The time

 

parameter can be adjusted in the Wacom Tablet control panel. See Battery and

 

wireless connection status.

 

Depending on your tablet model, wake from power saving mode by touching the

 

tablet, pressing an ExpressKey, or placing the pen in proximity.

 

 

Sleep mode

Tablet enters sleep mode:

 

• When there is no wireless connection for more than 4 seconds. For example,

 

you switch off the computer, move the tablet out of range, or unplug the

 

wireless receiver. To resume operations, correct any problem and ensure the

 

tablet is within range of your computer. Then press the power button on the

 

Wacom wireless module. See Testing your tablet.

 

• After 30 minutes of no user input.

 

• When the battery level is extremely low. Recharge the battery immediately.

 

To wake from sleep mode, first press the Toggle Button or the power button on

 

the wireless module. Depending on your tablet model, touch the tablet surface

 

with your finger or the pen. Then move your finger or pen along the tablet to fully

 

activate Intuos Pro.

Important: Conserve battery power by turning off the wireless module when you are not using the tablet. Push the power button on the wireless module to turn it off. Otherwise, the tablet battery may need charging before you can again use the tablet wirelessly. See Battery life information.

ContentsIndex

60