WatchGuard Technologies SSL VPN manual Using RSA SecurID for Authentication, Host, Port, Base DN

Using RSA SecurID for Authentication

Host

Host name or IP address of your LDAP server.

Port

Defaults to 389.

Base DN

You can leave this field blank. (The information provided by the LDAP Browser will help you determine the Base DN needed for the Authentication tab.)

Anonymous Bind

Select the check box if the LDAP server does not require credentials to connect to it. If the LDAP server requires credentials, leave the check box cleared, click Next, and enter the credentials.

4Click Finish.

The LDAP Browser displays the profile name that you just created in the left pane of the LDAP Browser window and connects to the LDAP server.

To look up LDAP attributes

1In the left pane of the LDAP Browser, select the profile name that you created.

2To look up the Base DN, in the right pane, locate the namingContexts attribute. The value of that attribute is the Base DN for your site. The Base DN is typically dc=myDomain,dc=com (if your directory tree is based on Internet domain names) or ou=domain,o=myOrg,c=country.

3Navigate through the browser to locate other attributes.

Using RSA SecurID for Authentication

If your site uses an RSA ACE/Server and SecurID for authentication, you can configure the Firebox SSL VPN Gateway to authenticate user access with the

RSA ACE/Server. The Firebox SSL VPN Gateway acts as an RSA Agent Host, authenticating on behalf of the users who use Secure Access to log on. The Firebox SSL VPN Gateway supports the use of one RSA ACE/Server.

Administration Guide 79