Watlow Electric 2000 Select a Menu

16 ■ Watlow MINICHEF 2000 Application 2

Step 8 Operate the Controller

Summary of Key Functions in Operation Mode

Key Operation Function

A None

B None

C Menu Increment

D Menu Select

E Start/Stop

F Menu Decrement

Start-up

Apply power to the oven.

[`idle] will appear on the display.

If the Real Time Clock Display option is installed and [setup] / [Cloc`] = [``Yes],

the time of day will appear on the display.

Select a Menu

1. Press the Menu Select key

The controller will display the currently selected menu.

2. Press the Up-arrow or Down-arrow key until the menu you want appears on the dis-

play.

The controller will only display valid menus (those for which Time 1 or Time 2 for

the menu are set to greater than 0).

3. Press the Menu Select key again or press the Start key to immediately run the

menu.

The menu you have chosen becomes the current menu for controller operation.

Preheat

If the [Ready] parameter under the [SetUp] function in the Configuration Mode is set

to yes, the controller will detect temperatures and preheat to operating temperature

(above relative set point minus the ready band).

DE

C

F

MINICHEF 2000

[````1]

Edit Accept

Back-UpExit

DE

C

F

MINICHEF 2000

[````9]

Edit Accept

Back-UpExit

AB

GH

AB

GH

DE

C

F

MINICHEF 2000

[`idle]

Edit Accept

Back-UpExit

AB

GH

Contents

Main MINICHEFTM 2000 Applications 1 - 6 Cook-&-Hold Oven Applications Guide Watlow Controls Programming & Operating Steps ISO 9001 TOTAL Table of Contents Application 1 Oven with Meat Probe Option 2 Watlow MINICHEF 2000 Application 1 Note: For details, see wiring instructions in the Input 2 Probe Temperature Event Input 1 Door Event Input 2 not used Application 1 Watlow MINICHEF 2000 3 this application. You must select Application 1 to access them. For directions, see the Page Step 7 Design a Faceplate Overlay Step 8 Operate the Controller Startup Page Page Page Cancel a Menu Temperature Alarms Errors Application 2 Oven with Meat Probe Option 12 Watlow MINICHEF 2000 Application 2 Note: For details, see wiring instructions in the Down Input 2 Probe Temperature Event Input 1 Door Open Event Input 2 not used Start/ Stop Up 4 Menu Select Application 2 Watlow MINICHEF 2000 13 this application. You must select Application 2 to access them. For directions, see the Page Page Select a Menu Application 2 Watlow MINICHEF 2000 17 [pre-`] [`Heat] [`1459] STEADY ON [`idle] Page Page Restart a Menu Change Menus Temperature Alarms Page Application 3 Oven Note: For details, see wiring instructions in the 24 Watlow MINICHEF 2000 Application 3 Application 3 Watlow MINICHEF 2000 25 this application. You must select Application 3 to access them. For directions, see the Page Page Startup Page Page Page Page Application 4 Automatic Cook-&-Hold Oven 34 Watlow MINICHEF 2000 Application 4 Note: For details, see wiring instructions in the Down Input 2 not used Event Input 1 Door Open Event Input 2 not used Event Output 1 Fan Low Start/ Stop Up 4 Menu Select Application 4 Watlow MINICHEF 2000 35 this application. You must select Application 4 to access them. For directions, see the Page Page Select a Menu Page Page Page Page Application 5 Manual Cook-&-Hold Oven with Meat Probe Option 44 Watlow MINICHEF 2000 Application 5 Note: For details, see wiring instructions in the Up Down 1 Temp(s) 2 Application 5 Watlow MINICHEF 2000 45 this application. You must select Application 5 to access them. For directions, see the Page M Set the Menu Single Step Menu Set the cooking time: Set the Hold Temperature Five Second Timeout Two Step Menu Set the two cooking temperatures and one probe temperature Set the two cooking times Set the Hold Temperature Five Second Timeout Run a Menu (with no preheat feature) View Actual Oven Temperature Adjust a Menu While Cooking Pause a Menu Restart a Menu Change Menus Temperature Alarms Application 6 Manual Cook & Hold Oven 56 Watlow MINICHEF 2000 Application 6 Note: For details, see wiring instructions in the Up Down 1 Temp(s) 2 Application 6 Watlow MINICHEF 2000 57 this application. You must select Application 6 to access them. For directions, see the of all parameters and values Page M Set the Menu Single Step Menu Two Step Menu Page Page View Actual Oven Temperature Adjust a Menu While Cooking Pause a Menu Change Menu or Restart Temperature Alarms Specifications 66 Watlow MINICHEF 2000 Specifications Ordering Information Ordering Information Watlow MINICHEF 2000 67 68 Watlow MINICHEF 2000 Ordering Information MINICHEF 2000 Accessories Tool Ordering Information: Part Numbers & Accessories MINICHEF 2000 Documentation Watlow Controls Page Application 6 Watlow MINICHEF 2000 71 Ordering Information