Watlow Electric 2000 - page 64

62 ■ Watlow MINICHEF 2000 Application 6

Set the two cooking times.

1. Press the Cook Time key [TiNe1] and then the first cooking time value will appear

on the display.

2. Press the Up-arrow or Down-arrow key until the value you want appears on the dis-

play.

3. Press the Cook Time key again.

The first cooking time has been set.

[tiNE2] and then the second cooking time value will appear on the display.

4. Press the Up-arrow or Down-arrow key until the value you want appears on the dis-

play.

5. Press the Cook Time key again.

The second cooking time has been set.

[`idle] will appear on the display.

Set the Hold Temperature.

1. Press the Hold Temp key [HtENP] and then the hold temperature value will appear

on the display.

2. Press the Up-arrow or Down-arrow key until the value you want appears on the dis-

play.

3. Press the Hold Temp key again.

The Hold temperature has been set.

[`idle] will appear on the display.

The menu you have set becomes the current menu for controller operation.

Five Second Timeout

When using the up or down keys to change a value, if you do not press any key for 5 sec-

onds, the controller will automatically be set to the last value on the display and return

to [`idle].

Preheat

If the [ready] parameter under the [SEtUP] function in the Configuration Mode is set

to yes, when you press the Start/Stop key to activate the menu, the controller will detect

temperatures and preheat to operating temperature (above relative set point minus the

ready band) as required.

If the oven is not at operating temperature, it will preheat. Meanwhile:

• The word [pre-`][`Heat] will appear on the display for a few moments. The

Start/Stop key indicator light will flash slowly.The temperature of Channel 1 will be

displayed until the operating temperature is reached.

AB

DE

C

F

GH

MINICHEF 2000

[`idle]

Edit Accept

Back-UpExit

SLOW

FLASH

AT OPERATING TEMPERATURE

(PREHEAT CONDITION MET)

RAPID

FLASH

B

DE

C

F

MINICHEF 2000

[100f`]

Edit Accept

Back-UpExit

B

DE

C

F

MINICHEF 2000

[ready]

Edit Accept

Back-UpExit

G H GH

A A

[pre-`] [`Heat]

Contents

Main MINICHEFTM 2000 Applications 1 - 6 Cook-&-Hold Oven Applications Guide Watlow Controls Programming & Operating Steps ISO 9001 TOTAL Table of Contents Application 1 Oven with Meat Probe Option 2 Watlow MINICHEF 2000 Application 1 Note: For details, see wiring instructions in the Input 2 Probe Temperature Event Input 1 Door Event Input 2 not used Application 1 Watlow MINICHEF 2000 3 this application. You must select Application 1 to access them. For directions, see the Page Step 7 Design a Faceplate Overlay Step 8 Operate the Controller Startup Page Page Page Cancel a Menu Temperature Alarms Errors Application 2 Oven with Meat Probe Option 12 Watlow MINICHEF 2000 Application 2 Note: For details, see wiring instructions in the Down Input 2 Probe Temperature Event Input 1 Door Open Event Input 2 not used Start/ Stop Up 4 Menu Select Application 2 Watlow MINICHEF 2000 13 this application. You must select Application 2 to access them. For directions, see the Page Page Select a Menu Application 2 Watlow MINICHEF 2000 17 [pre-`] [`Heat] [`1459] STEADY ON [`idle] Page Page Restart a Menu Change Menus Temperature Alarms Page Application 3 Oven Note: For details, see wiring instructions in the 24 Watlow MINICHEF 2000 Application 3 Application 3 Watlow MINICHEF 2000 25 this application. You must select Application 3 to access them. For directions, see the Page Page Startup Page Page Page Page Application 4 Automatic Cook-&-Hold Oven 34 Watlow MINICHEF 2000 Application 4 Note: For details, see wiring instructions in the Down Input 2 not used Event Input 1 Door Open Event Input 2 not used Event Output 1 Fan Low Start/ Stop Up 4 Menu Select Application 4 Watlow MINICHEF 2000 35 this application. You must select Application 4 to access them. For directions, see the Page Page Select a Menu Page Page Page Page Application 5 Manual Cook-&-Hold Oven with Meat Probe Option 44 Watlow MINICHEF 2000 Application 5 Note: For details, see wiring instructions in the Up Down 1 Temp(s) 2 Application 5 Watlow MINICHEF 2000 45 this application. You must select Application 5 to access them. For directions, see the Page M Set the Menu Single Step Menu Set the cooking time: Set the Hold Temperature Five Second Timeout Two Step Menu Set the two cooking temperatures and one probe temperature Set the two cooking times Set the Hold Temperature Five Second Timeout Run a Menu (with no preheat feature) View Actual Oven Temperature Adjust a Menu While Cooking Pause a Menu Restart a Menu Change Menus Temperature Alarms Application 6 Manual Cook & Hold Oven 56 Watlow MINICHEF 2000 Application 6 Note: For details, see wiring instructions in the Up Down 1 Temp(s) 2 Application 6 Watlow MINICHEF 2000 57 this application. You must select Application 6 to access them. For directions, see the of all parameters and values Page M Set the Menu Single Step Menu Two Step Menu Page Page View Actual Oven Temperature Adjust a Menu While Cooking Pause a Menu Change Menu or Restart Temperature Alarms Specifications 66 Watlow MINICHEF 2000 Specifications Ordering Information Ordering Information Watlow MINICHEF 2000 67 68 Watlow MINICHEF 2000 Ordering Information MINICHEF 2000 Accessories Tool Ordering Information: Part Numbers & Accessories MINICHEF 2000 Documentation Watlow Controls Page Application 6 Watlow MINICHEF 2000 71 Ordering Information