Watlow Electric 2000 Application 1 Watlow MINICHEF 2000 3, this application. You must select Application 1 to access them. For directions, see the

Application 1 Watlow MINICHEF 2000 ■ 3

Configuration Mode Quick Reference

These are the functions, parameters and values included in the Configuration Mode for

this application. You must select Application 1 to access them. For directions, see the

Hardware & Software Setup Guide. The Appendix of that guide includes an explanation

of all parameters and values.

Function Parameter Value Your Settings

{Etype} Equipment-Type [appl`]Application Number 1 - 28 1

[a_Loc] Application Number Yes, No

Security Lock

[Sound] Audible Alarm Sound 0 - 5

[FAn``] Fan Speed 1 spd, 2 spd

[delay] Fan Delay Time 0 - 120 minutes

[SEtUP] Setup [`Ç_Ï`] Temperature Display Format °C or °F

[time] Time Display Format MMM:SS, HH:MM, H:MM:SS

(H=Hours, M=Minutes, S=Seconds)

[Chirp] Key Chirp On, Off

[loc``] Menu Security Lock Yes, No

[tc```] Thermocouple Type J, K (shown as [````H]), E

[rtd``] RTD Curve DIN, JIS

[tconp] WatCurveTMTemperature On, Off

Compensation

[Ofst1] Temp. Offset, Channel 1 -99 to 99°F (-55 to 55°C)

[Ofst2] Temp. Offset, Channel 2 -99 to 99°F (-55 to 55°C)

[tr`lo] Temperature Range Low 0ºF (-18ºC) for RTD inputs,

32ºF (0ºC) for tc inputs to [tr`Hi]

[tr`Hi] Temperature Range High [tr`lo] to 1200°F (649°C)

[ready] Preheat Ready Feature Yes, No

[rband] Ready Band 1 to 1200°F (649°C)

[Cloc`] Real Time Clock Display Yes, No

[plOSS] Power Loss Menu Resume Yes, No

[al``1] Alarms for Channel 1 None, Dev, Proc, Both

[aL`P1] Absolute Process Alarm 1 100 to 1200°F (38 to 649°C)

[aLdL1] Low Deviation Alarm 1 -999 to 0°F (-555 to 0°C)

[aLdHi] High Deviation Alarm 1 0 to 999°F (0 to 555°C)

[AL``2] Alarm for Channel 2 None, Dev, Proc, Both

[AL`P2]Absolute Process Alarm 2 100 to 1200°F (38 to 649°C)

[aLdL2] Low Deviation Alarm 2 -999 to 0°F (-555 to 0°C)

[aLdH2] High Deviation Alarm 2 0 to 999°F (0 to 555°C)

[tHErl] Thermal [tyPE`] Temperature Control Type PID, On-Off

[HYSt1] Hysteresis 1 1 to 99°F (1 to 55°C)

[Pid`U] PID Units SI, US

[tune1] Auto-tuning 1 on, OFF

[ProP1] Proportional Band 1 1 to 999°F (1 to 555°C)

[rSEt1] Reset (integral) Gain 1 0.00 to 9.99 repeats/minute

[int`1] Integral Gain 1 0.00 to 99.99 minutes/repeat

[rAtE1] Rate (derivative) Gain 1 0.00 to 9.99 minutes

[dEr`1] Derivative Gain 1 0.00 to 9.99 minutes

[CYcL1] PID Cycle Time 1 1 to 60 seconds

[`diag] WatHelp Used for equipment troubleshooting and testing. Not used when programming. See the Hardware

Diagnostics & Software Setup Guide.