Assembly

Step 1

Tools needed

Check package contents

 

Regular screwdriver

 

Phillips screwdriver

Cooking box

(assembly)

 

Hammer

One 7/16 inch or an adjustable wrench

Lid (assembly)

® ®

Pliers

Tape Measure

Pencil

Electric drill

Supplies needed

You will need a soap and water solution to check for gas leaks. (See Step "Check for gas leaks.")

Note - The hardware size of nuts, bolts, and screws is given. For example "1/4-20 x 2 inch bolt" means a bolt 1/4 inch in diameter with 20 threads to the inch, 2 inches long. On a small screw for example, "6-32 x 1/2 inch screw" means a number 6 screw, with 32 threads to the inch, 1/2 inch long.

While we give much attention to our products, unfortunately an occasional error may occur. If a part is missing, do not go back to the store. Call the Weber Customer Service Center toll free 1-800-446-1071to receive immediate assistance. Have your owner’s man- ual and serial number of the barbecue available for reference.

Bottom tray

Control panel

Work table

Gas supply line (with the flare fitting loosely attached

for shipping purposes)

10

Page 10
Image 10
Weber 1500 owner manual Assembly, Step, Check package contents