Step 14
Add base panel
You will need: Base panel.
Put the right side in and down, tilt and set the left side in place. Figure 23.
Step 15
Install side panels
You will need: two side panels, and eight plastic buttons.
From the inside of the frame assembly, set the left side panel in place between the side frame legs.
Notice that there are two sets of holes in each side panel. Align the holes in the side panel to match the holes in the left side frame legs. Push in the four plastic buttons. Figure 24 (a).
Repeat with the right side panel.
Base panel | top |
| |
| Left side |
| panel |
Figure 23 | Right side |
panel | |
| bottom |
(a)
Figure 24
21